spoon OIL FILLER CAP

Extreme heat and engine vibration in Race Car can cause the OEM Plastic Cap to shake loose orSEEK even crack.
Spoon Oil Filler Cap made from High-Grade Aluminium, Expands at the same rate as your (Aluminium) Valve Cover, also has special rubber seal designed to reduce vibration transfer and hold cap in place.

seeker ULTRA-LIGHT OIL FILLER CAP [RED / BLUE / BLACK / GOLD / SILVER]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight ~60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.
WEIGHT: ~60g
AVAILABLE IN 5 COLOURS: ■Red ■Blue ■Black ■Gold ■Silver

SPOON RESERVOIR TANK COVER SET [SOX] *NEW*

The last thing you want to do at the circuit is lose traction thanks to someone having dropped fluids on to the track surface, let alone drop your own fluids and contribute to the problem - Spoon Reservoir Covers slide over your Brake Fluid Reservoir and Clutch Fluid Reservoir (etc.) and are designed to catch any fluids that may be spilled under high lateral-G driving at the circuit. Also helps prevent damage to engine-bay paintwork from spillage of Fluids.
25% Cotton 75% Polyester. 1PCE.

SEEKER RESERVOIR TANK COVER SET [SOX]

Fire Retardant Material. It is a safe reservoir tank cover that was manufactured in the flame-retardant material. Brake and clutch, and by using covered the reservoir tank of power steering fluid, to keep the quickly absorbed engine room boiling over of fluid to clean. The color is also the identity of the SEEKER "SEEKER orange".

SPOON HEAT BARRIER TAPE

Oil Viscosity decreases when subjected to constant high temperatures during performance driving. The Exhaust Manifold on B-series engines routes beneath the Oil Pan in very close proximity – this can lead to extreme heat transfer from the exhaust manifold. This is evident when you remove an old Oil Pan and inspect the shallow end of the pan where the exhaust manifold is closest – you will see baked on oil residue on the inside of the pan and this is clear evidence of high heat transfer from the exhaust. Spoon Heat Barrier Tape provides a thermal barrier in between the Exhaust Manifold and the Oil Pan. We recommend application of the Heat Barrier Tape to new Spoon Baffled Oil Pans as the fresh clean surface will provide excellent adhesion when the Oil Pan is new – plus installation Is very easy when the Oil Pan is off the engine. The Heat Barrier Tape can be used on other models and components where you would want to prevent heat transfer from various components into the fluid systems etc. For example Master Brake Cylinder (and Lines), Master Clutch Cylinder (and Lines) Brake Lines, S2000 Heat Shield… In fact, the Spoon S2000 Super Taikyu Race Car uses the heat shield over the entire Firewall through to the whole length of the Transmission Tunnel etc.
Size: 200mm x 300mm 

SPOON MAGNETIC DRAIN BOLT, ENGINE

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Engine Drain Bolt sold individually.

SPOON MAGNETIC DRAIN BOLT SET [ENGINE + TRANSMISSION]

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Set of Engine and Transmission Drain Bolts.

SPOON RADIATOR CAP [TYPE-D] FC3*

To raise the pressure of the cooling system raises the boiling point of the coolant. Spoon Radiator Caps raise the pressure to increase the efficiency of the cooling system. For the Complete Spoon Cooling System, we recomend using the Radiator Cap in combination withthe Spoon Thermo Switch, Spoon Thermostat and Spoon SEP Radiator Hoses. Please check with us for the correct type of Cap for use on your Vehicle - Type-D Caps suit newer Honda Radiators such as EG6/EG9/EG2/EK4/EK9/DC2/AP1/CL9 etc. Not suitable for use on Aftermarket radiators (please use Type-F).
SPOON: 1.35kgf/cm2
HONDA: 1.1kgf/cm2

SEEKER RADIATOR CAP [TYPE-D] FC3*

It is a high-pressure radiator cap to increase the pulling cooling efficiency boiling point of the coolant by increasing the pressure in the radiator.
This is quite useful at the time of high rotation traveling.
※ opening temperature: 1.3kgf / cm2 (normal 1.1)
1.3Kgf/cm2

SPOON MAGNETIC DRAIN BOLT, TRANSMISSION

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Transmission Drain Bolt sold individually.

SPOON MAGNETIC DRAIN BOLT SET [ENGINE + TRANSMISSION]

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Set of Engine and Transmission Drain Bolts.

RIGID COLLAR [FRONT] FK2

8 PCE

RIGID COLLAR [REAR] FK2

2 PCE

SPOON LONG HUB BOLT [EACH]

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Each.
SPOON: 52mm
HONDA: 44mm

SPOON LONG HUB BOLT [SET, 20]

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Set of 20.
SPOON: 52mm
HONDA: 44mm

SEEKER WIDE TREAD SPACER [5mm] EK9, EP3, FN2, FD2, DC2, DC5, AP1, AP2, ZF1

5mm Spacer 2PCE. 4x114 / 5x114. Aluminum is a die-cast of 5mm thickness wide tread spacer.
It was to minimize the camera shake by setting a high degree of accuracy and high strength and Honda vehicles only size the hub diameter (except one part of the model).
It will be the hub diameter 64m P.C.D 114.3 4 hole / 5 hole multi-type two 1SET.

SPOON BRAKE ROTOR, FRONT [300mm] EK9, DC2, CL7, ZF1, ZF2

262 - 282mm It is dedicated to the brake rotor of monocoque caliper installed.

SPOON BRAKE ROTOR, FRONT EK9, DC2 98-

I adopt a linear slit of four slit of different angles intervention during the rotation, brake rotor slit slit type of brake rotor spoon has reduced the occurrence of judder and wear of the pad by slit. A uniform surface pad and rotor surface, I show of the brake pad, heat load is reduced in the high-temperature, high-load, pedal feeling is also good inclination of the rotor is small. The material is high carbon.

SPOON BRAKE ROTOR, REAR [CONVERSION] EG6, EK4, DC2 96-

4x100 + 4x114 (multi PCD)

SEEKER HIGH-CARBON ROTOR, SLOTTED [FRONT] EG6, EG9, EG2, EK4

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.
Features slotted design for performance use.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR [FRONT] EG6, EG9, EG2, EK4

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR, SLOTTED [FRONT] EK9, DC2 (AUS)

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.
Features slotted design for performance use.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR [FRONT] EK9, DC2 (AUS)

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR, SLOTTED [FRONT] EP3

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.
Features slotted design for performance use.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR [FRONT] EP3

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR, SLOTTED [FRONT] FD2

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.
Features slotted design for performance use.

Pricing is for a pair of Rotors (RHS + LHS).

SEEKER HIGH-CARBON ROTOR [FRONT] FD2

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.

Pricing is for a pair of Rotors (RHS + LHS).

SPOON BRAKE PAD [FRONT] EG6, EK4, GE8RS

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [FRONT] EK9, DC2-98

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [FRONT]FD2 - BREMBO CALIPER

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [FRONT] FN2 *DISCONTINUED*

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [FRONT] FN2, AP1, AP2

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [REAR] EF9, EG6, EK4, DC2, GE3, GE8

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [REAR] EK9, AP1, AP2, EP3, ZF1, ZF2

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SPOON BRAKE PAD [REAR] FN2

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

SEEKER BRAKE PAD - TYPE C [FRONT] EG6, EG9, EG2, EK4

Seeker Type C Brake Pads are a high-performance pad tested in circuit racing conditions.
Carbon-Metal compound provides excellent braking force and resistance to fade with high durability and abrasion resistance. Can be used on the street by confident drivers.

Recommended for Circuit Use, Operating Temperature 0℃ ～ 700 ℃

SEEKER BRAKE PAD - TYPE C [REAR] EG6, EG9, EG2, EK4

Seeker Type C Brake Pads are a high-performance pad tested in circuit racing conditions.
Carbon-Metal compound provides excellent braking force and resistance to fade with high durability and abrasion resistance. Can be used on the street by confident drivers.

Recommended for Circuit Use, Operating Temperature 0℃ ～ 700 ℃

SEEKER BRAKE PAD - TYPE C [FRONT] EP3

Seeker Type C Brake Pads are a high-performance pad tested in circuit racing conditions.
Carbon-Metal compound provides excellent braking force and resistance to fade with high durability and abrasion resistance. Can be used on the street by confident drivers.

Recommended for Circuit Use, Operating Temperature 0℃ ～ 700 ℃

SEEKER BRAKE PAD - TYPE C [REAR] EP3

Seeker Type C Brake Pads are a high-performance pad tested in circuit racing conditions.
Carbon-Metal compound provides excellent braking force and resistance to fade with high durability and abrasion resistance. Can be used on the street by confident drivers.

Recommended for Circuit Use, Operating Temperature 0℃ ～ 700 ℃

SEEKER BRAKE PAD - TYPE E [FRONT] EG6, EG9, EG2, EK4

Seeker Type E Brake Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [REAR] EG6, EG9, EG2, EK4

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [FRONT] EK9, DC2 96 / AUSDM

Seeker Type E Brake Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [REAR] EK9, DC2 96 / AUSDM

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [FRONT] FD2 (BREMBO CALIPER)

Seeker Type E Brake Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [REAR] FD2 (BREMBO CALIPER)

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [FRONT] FN2

Seeker Type E Brake Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEKER BRAKE PAD - TYPE E [REAR] FN2

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SPOON BRAKE HOSE SET EG6, EG9. EG2, DC2, DB8

Spoon developed their high-strength Brake Hose Set to take the abuse of Circuit Use and Endurance Racing where the demands on the brake hydraullic system are extreme. Resistant to flex and heat, The Spoon Hoses will improve pedal feel and piston pressure and are an excellent upgrade for both Stock Brake Equipped vehicles an Big Brake Kits alike.
Spoon Brake Hose Set are made from high-strength Braided Stainless Steel Hose with inner Teflon coating for minimal resistance.

SPOON BRAKE HOSE SET EK4, EK9

Spoon developed their high-strength Brake Hose Set to take the abuse of Circuit Use and Endurance Racing where the demands on the brake hydraullic system are extreme. Resistant to flex and heat, The Spoon Hoses will improve pedal feel and piston pressure and are an excellent upgrade for both Stock Brake Equipped vehicles an Big Brake Kits alike.
Spoon Brake Hose Set are made from high-strength Braided Stainless Steel Hose with inner Teflon coating for minimal resistance.

SPOON BRAKE HOSE SET FD2

Spoon developed their high-strength Brake Hose Set to take the abuse of Circuit Use and Endurance Racing where the demands on the brake hydraullic system are extreme. Resistant to flex and heat, The Spoon Hoses will improve pedal feel and piston pressure and are an excellent upgrade for both Stock Brake Equipped vehicles an Big Brake Kits alike.
Spoon Brake Hose Set are made from high-strength Braided Stainless Steel Hose with inner Teflon coating for minimal resistance.

SPOON B PEDAL BOX EK9 *DISCONTINUED*

Based on New Genuine Honda Brake Pedal Assembly, Spoon strengthens, boxes and re-inforces the arms to prevent any flex or fatigue through extreme motorsport use.
Dramatically improves the reliability of the brake control and promotes pedal stiffness.

SPOON BRAKE PEDAL BOX FD2

Based on New Genuine Honda Brake Pedal Assembly, Spoon strengthens, boxes and re-inforces the arms to prevent any flex or fatigue through extreme motorsport use.
Dramatically improves the reliability of the brake control and promotes pedal stiffness.

SPOON STRIPE [EG6] *NEW* EG6

Spoon Stripe was released in 2015 as a sleek and stylish visual enhancment to your Honda.
Each set is specifically tailored for the vehicle and precision die-cut for ease of installation.
Utilizing the Type One orange colour, the Spoon Stripe adds a sporty look to the profile of your car.

Installation instructions:
http://blog.spoonsports.jp/wp-content/uploads/2016/02/75700-AP1-000-STRIPE.pdf

SPOON STRIPE [EK9] *NEW* EK4, EK9

Spoon Stripe was released in 2015 as a sleek and stylish visual enhancment to your Honda.
Each set is specifically tailored for the vehicle and precision die-cut for ease of installation.
Utilizing the Type One orange colour, the Spoon Stripe adds a sporty look to the profile of your car.

Installation instructions:
http://blog.spoonsports.jp/wp-content/uploads/2016/02/75700-AP1-000-STRIPE.pdf

SPOON WINDSHIELD BANNER

Spoon Windshield Banner is a functional and stylish upgrade. For fitment of Roll-Cage, the Sun-Visors must be removed for cage-clearance. The Spoon Banner replaces the function of the Window visors and can be trimmed to suit individual vehicle or personal requirments. Also weight saving through removal of window visors is a benefit.
Width: 185 x Height: 1450mm.

INSTALLATION TIPS:
- Wash car normally.
- Clean windscreen with Wax/Grease Remover.
- ISO Alcohol Wipe. - mix 1 droplet detergent with 2/3 Water 1/3 methylated spirits into Spray squirter.
- Squirt glass under banner. - Position Banner.
- Squeegee Water and Bubbles out.
- Trim edges with blade.
- Leave to dry in sun 1 Hour.

SPOON REAR WINDOW STICKER, BLACK [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

SPOON REAR WINDOW STICKER, WHITE [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

SPOON DOOR STICKER, BLACK [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

SPOON DOOR STICKER, WHITE [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

SPOON TEAM STICKER, BLACK [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

SPOON TEAM STICKER, WHITE [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

SPOON-SPORTS STICKER [BLACK] *NEW*

New School Spoon Sports Logo Sticker - us used on doors of modern Honda vehicles such as Fit GK5, CRZ, S660 etc.
H40mm x W250mm.

SPOON-SPORTS STICKER [WHITE] *NEW*

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.
H40mm x W250mm.

SPOON MARK STICKER SET [TSURU]

Spoon Mark Sticker Set - featuring the famous Spoon 'Tsuru' logo, based on the famous 'Spoon Curve' at Suzuka Circuit.
Each set icludes:
2 x Large Stickers - for use on Rear Bumper above Exhaust Tip.
3 x Medium Stickers - for use on Doors.
3 x Small Stickers - perfect for use on Helmets etc.

TYPE ONE MARK STICKER

Type One Mark Sticker - as used on Spoon Carbon Spoiler and other places.

TYPEONE LOGO STICKER *NEW*

New School Type One Sticker, die-cut vinyl style for use on Door etc.

TEAM SEEKER METAL STICKER [PLAQUE]

It is the official sticker of SEEKER.
It will be the specification feeling of luxury that has put the color in anodized aluminum metal plate.
Exterior is possible of course also attached easily into the interior of the dashboard and the like.
This sticker is the hope in the opportunity to make more of the communication field.

Plaque Style, Size: 100x36mm

SEEKER EMBLEM [BADGE]

Chrome Badge perfect for use on Bootlid / Tailgate or Dashboard.
SEEKER logo is a three-dimensional design and emblem which has been subjected to luxurious black chrome plating process. Black chrome has presence is rich in expression and or black out or shining dazzlingly by the angle at which the light hits. *Bright Chrome no longer available.
160mm x 18mm

SEEKER LOGO STICKER [S] 150mm

150mm Sticker. WHT/SILV/BLK

SEEKER LOGO STICKER [M] 300mm

300mm Door Sticker (Black).

SEEKER LOGO STICKER [L] 800mm

800mm Rear Window Sticker (White).

SEEKER HELMET VISOR STICKER

It is a competition style sticker pasted on the visor of the helmet. Front view of the part that is a sticker pasted on to be printed on the punching material of the sticker also we have secured.
You can use to cut according to the visor shape.
Width: ~435mm

SPOON CARBON LIP SPOILER EG6

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Mounting, attach it to remove the front lower skirt of STD.
Requires Spoon Lip Spoiler Bolt Set (Mounting Hardware).

SPOON CARBON LIP SPOILER EK4, EK9 96-

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Mounting, attach it to remove the front lower skirt of STD.
Requires Spoon Lip Spoiler Bolt Set (Mounting Hardware).

SPOON LIP SPOILER BOLT SET EG6, EK4, DC2

For use with Spoon carbon lip spoiler or OEM Honda lips / Ffront skirts.

SPOON CARBON BONNET EG6

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

SPOON CARBON BONNET EK4, EK9 96-

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

SPOON CARBON BONNET EK4, EK9 99-

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

SPOON CARBON BONNET FD2

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

SPOON CARBON BONNET FN2

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

SEEKER FRONT HALF SPOILER [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

SEEKER FRONT HALF SPOILER [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

SEEKER FRONT HALF SPOILER [FRP] FD2 TYPE-R

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).
Designed for use with JDM FD2 Type R Bumper (wider than regular bumper), may require some modification to fit non Type-R.

SEEKER FRONT HALF SPOILER [CARBON] FD2 TYPE-R

Available in Raw Carbon or with UV Protective coating (at additional cost).
Designed for use with JDM FD2 Type R Bumper (wider than regular bumper), may require some modification to fit non Type-R.

SEEKER LIGHTWEIGHT REAR WING EK4, EK9

SEEKER 2-PIECE REAR WING EK4, EK9

Center flaps made ​​of carbon, and the other is a two-piece rear wing made ​​of FRP.
And the exquisite looks no retrofit sense that it be painted in pure colors, made ​​of carbon center flap will produce a Civic more sporty. Of course it was involved in the aerodynamic surface. We are proud of the outstanding stability, such as stick to the road surface at the time of high-speed running.
Center flap Please use the setting of the car because it is capable of five stages and fine adjusted according to the running stage.
Requires Genuine OEM Honda EK9 Wing Base / Pedestal (sold separately).

SEEKER REAR SPOILER [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

SEEKER REAR SPOILER [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

SEEKER REAR SPOILER INSERT [CARBON] FD2

Plain weave is made ​​of carbon rear spoiler. Is the type to replace the black part of the original rear spoiler. Wing shape is larger in the rear while inheriting the original design. In addition to a significant contribution to the end part on the stability of the rear improvement at the time of high-speed running in it is in Gurnee shape. Wing angle adjustment function because of stiffness emphasis is not to have, but it has become the best balance in the current situation. 2 kinds of line-up of unpainted goods and UV-cut clear painted.
Available in Raw Carbon or with UV Protective coating (at additional cost).
JDM FD2 Civic Type-R Rear Wing required.

SEEKER CANARD SET [FRP] FN2

Has been further design in order to improve the traction performance to suppress the front lift of FN2 Civic is a front-wheel drive. It can be installed only in the drilling, etc. included double-sided tape without the need at all to the body, but the mounting strength in order to use the difference in level of genuine bumper is not a problem. The CARBON are also available.
Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

SEEKER CANARD SET [CARBON] FN2

Has been further design in order to improve the traction performance to suppress the front lift of FN2 Civic is a front-wheel drive. It can be installed only in the drilling, etc. included double-sided tape without the need at all to the body, but the mounting strength in order to use the difference in level of genuine bumper is not a problem. The FRP are also available.
Available in Raw Carbon or with UV Protective coating (at additional cost).

SEEKER FOG LAMP COVER [FRP] FN2

It is made ​​of FRP fog lamp cover. Of course, if you remove the genuine fog lamp, it is also possible to put the cover from the top, leaving the genuine fog. It was a simple shape that does not stand out so that it does not interfere with the design of the front mask. In the case of FN2, fog lamp lower edge height and go to some extent lower the vehicle height is the inspection incompatibility will be less than 250mm. In that case, it will be the vehicle inspection fit in that I am wearing this product. (Minimum ground clearance is required 90mm ensure) mounting is easy mounting of the only double-sided tape.
Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

SEEKER GRILLE [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

SEEKER GRILLE [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

SEEKER GRILLE [CARBON] FD2

It is the front grill made ​​of plain weave carbon (net included). Modeling and large-sized openings, such as flow, and carbon material is then transformed more like TYPE-R the image of the front mask. 2 kinds of line-up of unpainted goods and UV-cut clear painted. ※ color carbon finish (blue carbon, etc.) are also available. For more information, please contact us.
Available in Raw Carbon or with UV Protective coating (at additional cost).

SPOON 3D GT WING FD2

Spoon 3D GT Wing as used in Super Taikyu race series Spoon FD2 Type R.

SPOON S-TAI BUMPER FD2

Spoon S-Tai Front Aero bumper developed with CAD Modelling for minimal drag and maximum downforce for endurance racing and Time attack. Creates an ultra aggressive front end for FD Civic (Pre-Facelift or Facelift).

SEEKER ULTIMATE WIDE BODY KIT FD2

"Ultimate" that is, the front wide-body KIT to embody the "ultimate" we have completed.
Dedicated front fender is set to about 35mm wide on one side (as opposed to genuine), it has also fitted with wide tires of size 285. In the case of FD2 If you try to attach the wide tire you need to escape to the outside out of the clearance of the problem of the damper. The results show that a general wide fender of about 20mm wide might shortage occurs. "Ultimate" it is can be wide into literally the ultimate. Fender of design dare inherit the genuine shape, toward the side step side we consideration such that no more discomfort to the balance of the entire vehicle in to be shaped to converge very naturally. The front bumper under flap provided on the canard part and bumper center bottom of the tunnel type and shape with an emphasis on aerodynamics will demonstrate the down force, such as the front is stick in the high-speed range for. It and in design that has become a design to implant the genuine products to central opening and genuine brake duct part, gives a sophisticated impression familiar well to the body while aggressive and able to inherit the partially genuine design. Of course, also ties with wide fender is a natural with no step or the like.
Grill is a very stylish design with a dedicated integral. In addition this product you can pursue the color ring of only your own painted premise and then we have because of the owners sense the in paint. The FRP-made and partially two using the carbon we offer.

SEEKER DOOR HANDLE COVER [CARBON] FD2

Set of 4 Carbon door handle covers.
Available in Raw Carbon or with UV Protective coating (at additional cost).

SEEKER DOOR HANDLE COVER [CARBON] FN2

Set of 2 Carbon door handle covers.
Available in Raw Carbon or with UV Protective coating (at additional cost).

SPOON AERO MIRROR FD2

Spoon Aero Mirrors developed for minimal drag and stylish looks. Made from FRP with gel-coating, featurin Spoon Hydro Blue Mirrors (300R).

SPOON AERO MIRROR FD2

Spoon Aero Mirrors developed for minimal drag and stylish looks. Made from FRP with gel-coating, featurin Spoon Hydro Blue Mirrors (300R).

SPOON HYDRO-BLUE WIDE MIRROR EK4, EK9, DC2

Spoon Mirrors install over the existing standard wing mirrors featuring 900R Curvature for increased field of view with low-distortion.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
Hydrophilic Blue coating is also water and dirt resistant.

SPOON HYDRO-BLUE WIDE MIRROR EP3

Spoon Mirrors install over the existing standard wing mirrors featuring 900R Curvature for increased field of view with low-distortion.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
Hydrophilic Blue coating is also water and dirt resistant.

SPOON HYDRO-BLUE WIDE MIRROR FD2

Spoon Mirrors install over the existing standard wing mirrors featuring 900R Curvature for increased field of view with low-distortion.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
Hydrophilic Blue coating is also water and dirt resistant.

SPOON HYDRO-BLUE WIDE MIRROR FN2

Spoon Mirrors install over the existing standard wing mirrors featuring 900R Curvature for increased field of view with low-distortion.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
Hydrophilic Blue coating is also water and dirt resistant.

SPOON CARBON RACING MIRROR [ELECTRIC] *NEW* EG6

Spoon Carbon Racing Mirrors were launched over 20 years ago, now re-released using the original moulds and design.
Using the same famous aerodynamic shape, the mirrors are extremely tough and also lightweight. Now incorporating new Electric Mirror Adjustment and Spoon Hydro Blue Mirrors with 1000R curature for maximum vision. Also Features Printed Spoon-Sports Logo to identify the genuine product from counterfeit products.
Uses Genuine Honda OEM Mirror Baseplate for absolutely perfect fitment – also available without baseplate.

SPOON CARBON RACING MIRROR [ELECTRIC] *NEW* EK4, EK9

Spoon Carbon Racing Mirrors were launched over 20 years ago, now re-released using the original moulds and design.
Using the same famous aerodynamic shape, the mirrors are extremely tough and also lightweight. Now incorporating new Electric Mirror Adjustment and Spoon Hydro Blue Mirrors with 1000R curature for maximum vision. Also Features Printed Spoon-Sports Logo to identify the genuine product from counterfeit products.
Uses Genuine Honda OEM Mirror Baseplate for absolutely perfect fitment – also available without baseplate.

SPOON CARBON RACING MIRROR [MANUAL] EG6 *DISCONTINUED*

SPOON CARBON RACING MIRROR [MANUAL] EK4, EK9 *DISCONTINUED*

Manual Mirrors

SPOON WIPER BRADE EG6, DC2

Spoon Wiper Blades are designed to prevent deflection at high speeds with increased and uniform surface pressure as a result of reduced lift from the Aero Blade / Wind Deflector. For use on RHD Vehicles only.
Includes Complete Wiper Arm, uses Standard Wiper Refils.

SPOON WIPER BRADE EK4, EK9

Spoon Wiper Blades are designed to prevent deflection at high speeds with increased and uniform surface pressure as a result of reduced lift from the Aero Blade / Wind Deflector. For use on RHD Vehicles only.
Includes Complete Wiper Arm, uses Standard Wiper Refils.

SPOON DRy CARBON ROOF FD2 *DISCONTINUED*

SPOON BLUE WIDE REAR VIEW MIRROR FD2, FN2

Spoon Mirrors install over the existing standard mirror featuring 14000R Curvature for increased field of view with low-distortion - Basically the same field of view as a 'Broadway' mirror with just the small compact size of the standard mirror body.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.

SPOON STEERING WHEEL [340mm]

Spoon Steering Wheel is manufactured by Momo Italy utilising an unique rim contour and 340mmm diameter specifically designed for maximum grip under race conditions - especially suited for FF vehicles with extreme 'kick-back'. Covered in the highest quality Itallian leather with Red-stitching.
Includes Spoon Horn Button (not sold separately).

SEEKER RACING SPEC STEERING WHEEL [325mm]

It is Kodawari of the steering wheel in pursuit of the sport driving, including race, and the like. 
The high rigidity and a 6061 aluminum alloy 5t with excellent corrosion resistance using the base frame epidermis was arrogance luxury smooth leather. (Using a punching leather to 9 o'clock, 3 o'clock in order to improve the familiar). Grip has adopted a finger Gakari good shape a slightly thick as can be driving and disconnect the power.  Stitch of the portion of force is applied does not have a worry that leather may come off even if I use it for many years I have been put in a cross-shaped. 
In addition to place a well-balanced logo and the top mark and our slogan to several places body finished in a stylish design. 
"R-SPIRIT" horn button of the dedicated will be attached. ■ specification steering outer diameter: 325mm Frame: 6061 aluminum alloy 5t Stitch: Red color of the cross-stitch epidermis: Luxury Black smooth leather (partially use the punching leather) Embroidery: Top on the surface 6 o'clock SEEKER logo, at 12 o'clock mark, embroidery our slogan on the back 12 o'clockhorn: dedicated "R-SPIRIT" horn button included

SPOON STEERING BOSS [SRS-DELETE] FD2, FN2, ZF1

Spoon Steering Boss Kits are die-cast aluminium units designed for minimal weight and maximum strength.
Suitable for use with Spoon, Momo and Nardi wheels.
Includes SRS Delete Harness to eliminate the Airbag Warning Light.
Includes Steering Wheel Bolts (Allen style).

SPOON CARBON BUCKET SEAT [V2] *COMING SOON*

Spoon Racing Carbon Bucket Seats are designed to hold the driver firmly into place in the perfect driving position. Ultra lightweight Carbon Fibre construction, weighing in at only 5.7Kg, this is the ultimate Racing Seat for your Honda. Designed to reduce driver-fatigue through long races.
■ Revised design to meet new Japanese safety standards (in development)
■ Pre-Orders JAN2019 - Production ETA April 2019

SPOON CARBON BUCKET SEAT [V1] *DISCONTINUED*

Spoon Racing Carbon Bucket Seats are designed to hold the driver firmly into place in the perfect driving position. Ultra lightweight Carbon Fibre construction, weighing in at only 5.7Kg, this is the ultimate Racing Seat for your Honda. Designed to reduce driver-fatigue through long races.
■ Weight ~5.7Kg.
■ Discontinued 2018

SPOON ALUMINIUM SIDE STAY [FOR SPOON CARBON BUCKET SEAT]

Spoon Seat Bracket for use with Spoon Carbon Bucket Seats (Side-Mount).

■ Side-Mount Seat Bracket for use with Spoon Carbon Racing Bucket Seat.
■ For use with Seeker / Bride or Recaro Rails without side stay - for example Type-RO,RB. Drill Rail and fix with bolt.
■Includes Mounting hardware.

SEEKER x BRIDE FULL BUCKET SEAT [FRP]

It is a full bucket seat of the collaboration model of the BRIDE boasts a high rigidity and excellent hold of. The underlying shell has adopted the VIOS3 with the most matches easily seat position as much as possible down easy structure in Japanese type (Low MAX).
Shoulder support is somewhat smallish because, wearing indoor space to narrow a S2000 is also available.
This collaboration model inherits the design of the predecessor full bucket seat that had gotten popular, adopt a skin fabric red and black two-tone specification.
The BRIDE sheet somewhat strong competition image by the headrest further subjected to a dedicated logo embroidery to add a bright red stitch performance is intact, we have succeeded in that to be transformed into optimal fashionable to street youth It was.
BRIDE-made seat back protector in this product (black) is standard equipment.
Seat rail (sold separately) is a vehicle inspection also safe because it becomes a security standard conform if you can use in combination with made BRIDE.
Please feel free to contact us so we will also sell BRIDE seat rail.

Note: If you are attached to the S2000 has a case where BOX lid portion that housed the trunk opening and closing the switch can not be to interfere with the fully open to the sheet. In each case there is no problem if it is possible to slide the seat forward.

■ Specifications
Shell: FRP Silver Shell (VIOS3-based)
Skin fabric: Black & Red logo dedicated logo and dedicated Red stitch Add
Sheet weight about 7.1kg (not including the seat rails)

SEEKER SEATBELT WARNING CANCELER [ALUMINIUM]

Eliminates seatbelt warning light when using harness at the circuit / motorsport. Simply plug in to your stock seatbelt plug while you are not using the standard sash-belts.

SPOON SHIFT KNOB, ALUMINIUM [6MT]

Spoon Alloy Shift Knob is the same countour as the Duracon however it is a little heavier at ~130g.
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

SPOON SHIFT KNOB, DURACON [6MT]

Spoon Duracon Shift Knob is made from a special Heat-Resistant Thermo-Plastic - perfect to resist heat-soak from the transmission and exhaust and heat from direct sunlight and Summer cabin temperatures. Lightweight design at just ~80g
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.
The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O) and carbon-carbon (-C-C- bond) comonomer groups are incorporated into its main chain. Therefore the copolymer has superior chemical and thermal stability, compared with acetal homopolymer. Acetal co-polymer is well-balanced in terms of mechanical, chemical and thermal properties, and its superior moldability allows it to be widely employed in various industrial fields.
Source: PolyPlastics.

SEEKER HEAVY SHIFT KNOB 400g [6MT] EP3, DC5, FN2, FD2, AP1, AP2, ZF1

Same shape and size as Honda genuine shift knob - spherical type.
It was it possible to reliably shift work as well as to achieve a very moist and shift feel from its weight. Further, in order to perform a shift operation using the weight of 400g, it is gentle to be characterized for the respective gears.
We were greatly improved wear resistance and oxidation resistance subjected to TiAlN (titanium aluminum nitride coating) process on the surface. Furthermore SEEKER logo and shift patterns ( 6MT) to the top part we laser etching. Distinctive color and texture with the TiAlN, and enjoy the feel of heavyweight Come. ■ stainless steel surface treatment: TiAlN (titanium aluminum nitride coating). Weight: about 400g 5MT dedicated Honda genuine nuts separately if ■ genuine knob of car not a nut fixed You will need.

SEEKER: 400g (Stainless Steel)
STOCK: ~140g (Aluminium)

SEEKER SHIFT BOOT COLLAR FN2, FD2, DC5, CL7, CL9, GE8, GK5, ZF1

Machined aluminium shift boot collar for use with aftermarket gearknobs on modern Hondas.

For CR-Z · S660 of GE-FIT and GK-FIT and 1 parts of which have taken a system that connects the shift boot and genuine knob, not good appearance when combined with external shift knob. This is especially recommended for the appropriate type of vehicle so you can improve the aesthetics in that you use this shift boot color.
In addition, since we have a standard feature an O-ring on the inside of the boot color, it is easily possible to set the vertical position of the color.
It also prevents abnormal noise which is generated by the vibration of the engine.

And removing the genuine color is easy mounting of only tighten this product with the supplied tie wrap.

sEEKER SHIFT BOOT COLLAR [OEM NUT] FN2, FD2, DC5, CL7, CL9, GE8, GK5, ZF1

Machined aluminium shift boot collar for use with aftermarket gearknobs on modern Hondas.

For CR-Z · S660 of GE-FIT and GK-FIT and 1 parts of which have taken a system that connects the shift boot and genuine knob, not good appearance when combined with external shift knob. This is especially recommended for the appropriate type of vehicle so you can improve the aesthetics in that you use this shift boot color.
In addition, since we have a standard feature an O-ring on the inside of the boot color, it is easily possible to set the vertical position of the color.
It also prevents abnormal noise which is generated by the vibration of the engine.

And removing the genuine color is easy mounting of only tighten this product with the supplied tie wrap.